CM-325FUNCTIONAL TRAINER

·      Internal cable system for a streamlined appearance to eliminate user contact with cables.  Mil-spec lubricated 1/8-inch cable coated to 3/16-inch with 4800 lbs. breaking strength.

·      Cable assembly with swaged steel ball fitting and custom manufactured 5/8-inch retention bolt. This tension adjustment system tested at 500lbs for 5,000,000 cycles to insure reliability.

·      The cable end fitting attached at the handle contains a radial ball bearing that provides independent rotation of the handle to eliminate twisting of the cable. This assembly was tested to 1,000,000 cycles at twice the maximum weight stack load.

·      Spring-loaded pull pin assembly conveniently located with 11 vertical positions equaling 150º of adjustment

·      Spring-loaded foot pedal for quick and easy horizontal adjustment of arms. There are 8 different width positions with 105º of adjustment.  This unique design eliminates confusion caused by dual adjustments (vertical and horizontal) being placed in proximity of one another

·      Has an elastic shock cord to prevent undesired rotation of pulley housing.

·      Constructed from 3-inch x .120 wall round tubular steel. Columns swivel on 35mm sealed bearings at the base and top of unit. Chrome adjustment plates for durability

·      Arms made from 2-inch x 2-inch x .120 wall tubular steel with a counter-balance system.  This counter-balance feature offsets the  weight of the adjustment arms.  Counter-balance spring assembly tested in excess of 500,000 cycles at full adjustment tension.

·      1-inch machined weight plates with Textured Black electrostatically applied powder coat paint and fitted nylon bushings to insure smooth travel on guide rods.

·      Cold rolled solid 1-inch diameter selector shaft-chrome plated for durability and appearance. Machined to bullet tip to insure proper weight stack entry. Machined custom cap plate with fitted nylon bushings insures proper travel of weight plates over guide rods.

·      4 ½-inch & 3 ½-inch Fiberglass™ reinforced pulley wheels with deep

V-grooved channel provide maximum cable contact and bearing rotation. Sealed lifetime ball bearings insure smooth and quiet pulley operation.

·      Heavy-duty magnetic pins insure positive locking to weight plates. Tethered to cap plates with thick plastic-coated elastic cable.

·      Instructional Placard displaying the exercises performed on the machine.

·      4-inch x 2-inch & 3-inch x 2-inch x .120 wall tubular steel with Textured Black electrostatically applied powder coat paint.

·      Unit measures 40-inch deep x 65-inch wide x 78-inch tall (max in use

65-inch deep x 124-inch wide x 85-inch tall)

·      Standard 2:1 ratio unit weighs 700 lbs.

·      Custom molded rubber foot pads insure stability and prevent marring of flooring surfaces

·      High volume facilities including Fitness Centers, (large) Personal Training Studios, College/University Recreation Centers, Pro Sports Teams, Country Clubs, Military Recreation and Training Centers, YMCA’s, YWCA’s, Municipalities, Corporate Fitness Centers, Wellness/Hospitals, Rehab/Physical Therapy Clinics, (large or 5 & 4 star) Hotel Fitness Centers or any other commercial facility