P-180 HORIZONTAL LEG PRESS (LINEAR BEARING)

FRAME

ASTM A 500 GRADE B structural carbon steel tubing 2” x 3” 11 Gauge base and 2” x 3” 11 Gauge upright are welded solid. Pulley housing are ¼” thick by 6” wide solid steel completely inclosing the pulley wheels and are welded solid to the frame, Unit is completely adjustable to accommodate any size athlete. Alignment adjustments are case harden high tensile strength A36 steel, R O M are 3/8” thick solid steel as well as the cams. A counter balance for exact resistant.  25 Degree frame angle with a linear bearing drive system.  Double sealed pillow block bearings at all pivot points for smooth movement and no maintenance.

CABLES & WEIGHT STACKS & PULLEY WHEELS

Military spec 4810 lb. test galvanized air craft cable self lubricated nylon coating, Solid steel weight stack plates are machined to within one oz. of there weight, All plates have self lubricating graphite bushings and two 3” diameter plate spacers to keep the plates from touching and clanging together, 1” solid steel chrome guide rod, Pulley wheels are reinforced solid web fiberglass body with a ½” cable groove. Double sealed oil dipped racer ball bearings with a ½” axes shaft hole. Sealed for moisture and dust proof.

UPHOLSTERY

Premier Heavy-duty40 oz. commercial grade marine naugahyde, Federal Specification AA-2950A (Supercedes CCCA680a), Federal Aviation Admin. FAR 25.853 (b) & appendix F Part 1 (i) (ii)(v)

Boston Fire Code (BFD IX-1), port Authority of NY & NJ., Bacteria resistant, Padding is 3” closed cell

High Density form reinforced with ¾” thick plywood back support.

FINISH

4 Stage state of the art Magnetic Powder Coat Process that purifies the material before coating and baking on the urethane paint finish (the toughest paint available)