P-2000 Shoulder Press

Adjustable positions on all machines to accommodate all users to ensure correct biomechanical function. Adjustments are made with Heavy Duty spring loaded pull-pin knobs. Weight Stacks are adjusted with a tethered, magnetic selector pin that extends through the entire weight stack. Cable system. Cables are 3/16� thick 4800lb test military spec galvanized oil impregnated air craft cable finished with a tough nylon coating _� thick Manual Tension adjusters on every machine for the cable adjustments. Weight stack plates are solid steel machined precisely to correct weight. Weight stack is accessible from a seated position. Weight stacks are enclosed in Full length Shrouds (optional) Bright red colored pull knobs Weight system allows user to add 5 or 10lb weights to the weight stack. (optional) Heavy-duty 40 oz. commercial grade marine naugahyde upholstery which is 85% mildew resistant. High density closed cell foam reinforced by _� thick plywood backing for stable support. Each machine is made with a lower starting weight stack and has counter-balanced arms when needed. Exceeds all ASTM requirements. Guide rods are 1� CCRO ANSI 1045, solid steel hard chrome-plated with tensile strength of 75,000psi. Frames are constructed of High Stress 3/16� ASTM A-500 grade B structural steel tubing ( 11 gauge). 2� x 4�, 2� x 3� tubing. 2� x 3� tubing is use on all uprights, 2� x 2� x 1/8� ASTM A-500 grade B structural carbon steel tubing (11gauge) is used on cross members and benches. All welds are ground down and stress tested 3-stage pre-paint preparatory process that includes a state of the art wash system that paralyzes the material. Then the material is processed through a dryer to dry the material. The material is then sent through a preheat stage before it has the magnetic paint powder applied. (optional colors) Urethane foam grades are a minimal grading of HR-125 (density pcf of 2.60 plus/minus 0.10 and above in high-compression areas (HR-150 with a density pcf of 4.60 plus/minus 0.30). Cams are computer designed and precision flame cut to exact shape to allow proper variable resistance throughout the exercises complete range of motion. All Cams are 1/4� thick solid steel. The cams are different for each machine to provide the correct movement for the exercise. Shrouded pulley housing is 6� x _� thick solid steel. Pulley Wheels are 4 _� and 6� solid fiberglass reinforced body with a 1/2� cable groove. Oil dipped double sealed racer ball bearings with a _ � axis shaft hole. Sealed for moisture and dust proof.

FRAMES 2" x 3" x 11 gauge base and up rights, 2" x 2" x 11 gauge steel tubing welded in to place. Component parts are constructed of high tensile strength �"steel. Lifetime warranty against weld failure, bending and cracking of material. Rubber bumpers included for quiet impact. LINEAR BEARINGS Specially designed high strength machined linear bearings to give a smooth and comfort action when lifting. Sealed to prevent dust and moisture. 10-YEAR WARRANTY GUIDE RODS 1 �" Solid steel harden chrome plated rod is used for exact alignment and lifting. 5 YEAR WARRANTY DIMENSIONS 60" HIGH X 36" WIDE X 72" LONG. Total weight 500lbs. Included are safety requirements and charts. UPHOLSTERY Heavy commercial, bacteria resistant, 40 oz, Naugahyde. Full 3" high-density foam padding with �' plywood base. FINISH All frames are run through a 4-step state of the art POWDER COAT PROCESS that provides the highest quality painted finish available.