| The upper and lower racks are tilted forward to achieve a safe and easy lift off and re-rack of the dumb bells. The racks are designed so that you can get closer to the dumb bells, not having to bend over so much to accomplish the lift off and re-rack of the dumb bells. The top rack is designed low enough to store the heavier dumb bells. > The Lower rack is strategically placed so that the sizes of the dumb bells are clearly visible and not obstructive with the top rack when racking and re-racking the dumb bells. > The Dumb Bell Saddles are rubber cast to protect the finish on the dumb bells and to dampen the sound of the racking of the dumb bells. > Custom made rubber feet with bolt down holes > The Dumb Bell Rack is designed so that the rack fits as close to the wall as possible |
| Length 28" Width 95" Height 32" Weight 210lbs |
| FRAMES 2" x 3" x 11 gauge base and up rights, 2" x 2" x 11 gauge steel tubing welded in to place. Component parts are constructed of high tensile strength ¼"steel. Lifetime warranty against weld failure, bending and cracking of material. Rubber bumpers included for quiet impact. UPHOLSTERY Heavy commercial, bacteria resistant, 40oz Naugahyde. Full 3"High-Density foam padding with ¾"plywood base for more comfort and a stronger support. PILLOW BLOCK BEARINGS Installed on all pivot points for smooth movement comes with a 10- year warranty. DIMENSIONS 32" H x 42" W x 48"L. Total weight 200 lbs. FINISH All frames are ran through a 4 step state of the art POWDER COAT PROCESS that provides the highest quality painted finish available. |
|
